EasyZone Mikrotik Billing : Hotspot สำเร็จรูป สำหรับรา้นกาแฟ, ร้านอาหาร, รีสอร์ท, โรงแรม

Port Forwarding for the Billion Bipac-5200


Port Forwarding for the Billion Bipac-5200

What is Port Forwarding?
What is Port Triggering?


To setup port forwarding on this router your computer needs to have a static ip address. Take a look at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below.

Do not skip this step!


Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to

You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is admin. Click the Ok button to log in to your router.

Click the Advanced Setup link near the top of the page.

Click the NAT link near the top of the page.

Click the Virtual Server link near the center of the page.

Rule Index :
Start Port Number :
End Port Number :
Local IP Address :

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. HTTP requires you to forward the 80 ports. Go ahead and enter the settings shown above into the Virtual Server menu and then click Save.

And that is it! You are done!

  by: EasyZone       วันที่ 28/03/2551 - 17:43:10